ALLTEC NETWORK  
FAQ's About Us
Site Map Contact Us
Useful Links Privacy Notice
Shipping & Returns Terms & Conditions
HomeMy AccountSpecial OffersCart ContentsCheckoutSearch 
 
Manufacturers

Reviews
Alcali
[SGALC-10]

£28.39 £25.55

Description/Characteristics:
CHARLY® SUPER FLOOR CLEANER ALCALI is a universal, detergent-free, alkaline cleaning concentrate specially developed for the CHARLY® SUPER-MOP. Owing to its special properties, the cleaner may also be used for other cleaning purposes, i.e. floor and machine cleaning. 
CHARLY® SUPER FLOOR CLEANER ALCALI works by means of enzyme-free micro-splitting without detergents. It is foam-free, absolutely odour-neutral and does not contain any HARSH substances. Cleaned floors are non re-soiling. Normally no set-up times are required. Do not use on polymers-coated floors. The cleaner removes soot, grease, oil, wax, etc. 

Application/Substrates:
CHARLY® SUPER FLOOR CLEANER ALCALI can be applied to all alkaline resistant stone floors. Surfaces not to be treated should be protected sufficiently. Always pre-test surface to be treated in an inconspicuous area before proceeding.

Technical Data:
Odour: neutral       Appearance: clear     Dilutable: yes (water)     pH-value: approx. 11.8  (concentrate)
Storage: frost-free in closed original containers.
 
Cleaning Instructions:
Standard dilution ratio for basic cleaning 1:5 to 1:15, rinse with clear water. Maintenance cleaning: 1:50 to 1:400. Dilution ratio may be in- or decreased according to requirements. Use in combination with CHARLY SUPER MOP. In tenacious cases repeat treatment. In case of lime deposits alternating use of CHARLY SUPER FLOOR CLEANER ACIDO  is suggested.

Disposal/Precautions:
CHARLY® SUPERMOP CLEANER ALCALI is not subject to special marking. In case of direct contact with the product wear alkaline resistant gloves and protective goggles. Change contaminated clothes. Further safety information, S-phrases etc. are contained on the label and the EC Safety Data Sheet. Keep out of the reach of children. Water hazard class 1 (lowest class).


All recommendations are based on practical experience, but should be modified, if necessary, to conform with different practice conditions. We cannot claim to serve in any but an advisory capacity and can undertake no liability. Tests should be carried out in each individual case before the work is started.

 

Shopping Cart
0 items
Tell A Friend
 
Tell someone you know about this product.
Copyright © 2010 Alltec Network
Development by eStoreBuilder.co.uk